How To Replace That Belt

  • TrendingHotPopular

    in

    How to Replace timing belt on Nissan Qashqai 1.5 dCi 2006-

    Replacement Interval Guide Citroen recommends: C2/C3 I/II/III/C3 Pluriel: →28/07/05: Replacement every 80,000 miles or 10 years under normal conditions or 50,000 miles or 10 years under adverse conditions. 29/07/05→: Replacement every 100,000 miles or 10 years under normal conditions or 75,000 miles or 10 years under adverse conditions. Berlingo: →28/07/05: Replacement every 75,000 miles or […] More

  • Popular

    in

    How to Replace timing belt on Citroen C3 1.1 2009-

    Replacement Interval Guide Citroen recommend: C2/C3 I/II/III/C3 Pluriel: →28/07/05: Replacement every 80,000 miles or 10 years under normal conditions or 50,000 miles or 10 years under adverse conditions. 29/07/05→: Replacement every 100,000 miles or 10 years under normal conditions or 75,000 miles or 10 years under adverse conditions. Berlingo: →28/07/05: Replacement every 75,000 miles or […] More

  • in

    How to Replace timing belt on Citroen C1 1.4 HDi B0

    Replacement Interval Guide Citroen recommend: 12,500 mile service intervals – replacement every 150,000 miles or 10 years under normal conditions or 120,000 miles or 10 years under adverse conditions. 20,000 mile service intervals – replacement every 160,000 miles or 10 years under normal conditions or 112,500 miles or 10 years under adverse conditions. The previous […] More

  • in

    How to Replace timing chain on Citroen C1 1.0 B0 (CFB Engine)

    Special tools Crankshaft pulley holding tool – No.0132.AA. General precautions Disconnect battery earth lead. Remove spark plugs to ease turning engine. Turn engine in normal direction of rotation (unless otherwise stated). Observe tightening torques. If fitted: Mark position of crankshaft position (CKP) sensor before removal. Do NOT turn crankshaft via camshaft or other sprockets. Do […] More

  • Trending

    in

    How to Replace timing chain on Citroen C1 1.0 B0 (CFA Engine)

    Special tools Crankshaft pulley holding tool – No.C.0132.AA. General precautions Disconnect battery earth lead. Remove spark plugs to ease turning engine. Turn engine in normal direction of rotation (unless otherwise stated). Observe tightening torques. If fitted: Mark position of crankshaft position (CKP) sensor before removal. Do NOT turn crankshaft via camshaft or other sprockets. Do […] More

  • TrendingHotPopular

    in

    How to Replace timing belt on Citroen Berlingo B9 1.6 HDI

    Replacement Interval Guide Citroen recommend: Replacement every 150,000 miles or 10 years under normal conditions. Replacement every 120,000 miles or 10 years under adverse conditions. The previous use and service history of the vehicle must always be taken into account. Check For Engine Damage CAUTION: This engine has been identified as an INTERFERENCE engine in […] More

  • in

    How to Replace timing belt on Citroen C5 1.6 HDI 2008

    Special tools C4: Auxiliary drive belt removal tool – Citroen No.(-).0194/3-D. C5/Berlingo: Auxiliary drive belt tensioner pulley locking tool – Citroen No.(-).0194.F. C5/Berlingo without electric power steering (EPS): Auxiliary drive belt tensioner pulley adjusting tool – Citroen No.(-).0188.Z. Berlingo with electric power steering (EPS): Auxiliary drive belt tensioner pulley adjusting tool – Citroen No.(-).0194.E3. Camshaft […] More

  • Trending

    in

    How to Replace timing chain on Citroen Jumper 2.2HDi 2003

    Special tools Flywheel locking tool – Citroen No.(-).188.F. Flywheel timing pin – Citroen No.(-).0188.Y. Camshaft timing pin – Citroen No.(-).0188.M. Tensioning tool – Citroen No.(-).0188.J2. Timing belt retaining clip – Citroen No.(-).0188.K. Tension gauge – SEEM CTG 105.5M. Crankshaft pulley puller – Citroen No.(-).0188.P. Special precautions Disconnect battery earth lead. DO NOT turn crankshaft or […] More

  • in

    How to Replace timing belt on Citroen C2 1.6 2003-10

    Special tools Camshaft timing pins – Citroen Nos.4533-T.AC1/2. Flywheel locking tool – Citroen No.4507-T.A. Tensioner pulley locking pin – Citroen No.4200-T.H. Timing belt retaining clip – Citroen No.4533-T.AD. Special precautions Disconnect battery earth lead. DO NOT turn crankshaft or camshaft when timing belt removed. Remove spark plugs to ease turning engine. Turn engine in normal […] More

Load More
Congratulations. You've reached the end of the internet.
Back to Top
close