Citroen

Special tools Crankshaft pulley holding tool – No.C.0132.AA. General precautions Disconnect battery earth lead. Remove spark plugs to ease turning engine. Turn engine in normal direction of rotation (unless otherwise stated). Observe tightening torques. If fitted: Mark position of crankshaft position (CKP) sensor before removal. Do NOT turn crankshaft via camshaft or other sprockets. Do […] More

Replacement Interval Guide Citroen recommend: Replacement every 150,000 miles or 10 years under normal conditions. Replacement every 120,000 miles or 10 years under adverse conditions. The previous use and service history of the vehicle must always be taken into account. Check For Engine Damage CAUTION: This engine has been identified as an INTERFERENCE engine in […] More

Special tools Flywheel locking tool – Citroen No.(-).188.F. Flywheel timing pin – Citroen No.(-).0188.Y. Camshaft timing pin – Citroen No.(-).0188.M. Tensioning tool – Citroen No.(-).0188.J2. Timing belt retaining clip – Citroen No.(-).0188.K. Tension gauge – SEEM CTG 105.5M. Crankshaft pulley puller – Citroen No.(-).0188.P. Special precautions Disconnect battery earth lead. DO NOT turn crankshaft or […] More

Special tools Special precautions Repair times – hrs   Camshaft drive belt/chain – R & I 2,60 Valve timing procedures   Removal Installation NOTE: DO NOT refit used belt. More

Special tools Camshaft timing pins – Citroen Nos.4533-T.AC1/2. Flywheel locking tool – Citroen No.4507-T.A. Tensioner pulley locking pin – Citroen No.4200-T.H. Timing belt retaining clip – Citroen No.4533-T.AD. Special precautions Disconnect battery earth lead. DO NOT turn crankshaft or camshaft when timing belt removed. Remove spark plugs to ease turning engine. Turn engine in normal […] More

Special tools Flywheel locking tool – Citroën No.(-).0188.F. Crankshaft pulley puller – Citroën No.(-).0188.P. Flywheel timing pin (except C5) – Citroën No.(-).0188.Y. Flywheel timing pin (C5) – Citroën No.(-).0118.X. Camshaft timing pin – Citroën No.(-).0188.M. Timing belt retaining clip – Citroën No.(-).0188.K. Tensioning tool – Citroën No.(-).0188.J2. Tension gauge – SEEM C.Tronic 105.5. Set of […] More

Special tools Flywheel locking tool – Citroën No.(-).0188.F. Crankshaft pulley puller – Citroën No.(-).0188.P. Flywheel timing pin (except C5) – Citroën No.(-).0188.Y. Flywheel timing pin (C5) – Citroën No.(-).0118.X. Camshaft timing pin – Citroën No.(-).0188.M. Timing belt retaining clip – Citroën No.(-).0188.K. Tensioning tool – Citroën No.(-).0188.J2. Tension gauge – SEEM C.Tronic 105.5. Set of […] More

Repair Times – hrs Camshaft drive belt/chain – R & I 2,40 Special Tools •   C3 III: Auxiliary drive belt tensioner pulley locking tool – Citroen No.0188-Q1. •    C3 III: Auxiliary drive belt tensioner pulley adjusting tool – Citroen No.0188-Z. •    Camshaft timing pin – Citroen No.4507-T.B or 0132-RZ. •    Flywheel timing pin – Citroen No.4507-T.A […] More

Manufacturer: Citroen Model: C4 2,0 Engine code: RFJ (EW10A) Output: 105 (143) 6000 Tuned for: R-Cat AT Year: 2004-09 Camshaft drive belt/chain – R & I  2,50 • C4: Auxiliary drive belt tensioner tool – Citroen No.(-).1608.E. •    C4: Camshaft timing pins – Citroen No.(-).0194-B. •    C5: Camshaft timing pins – Citroen No.(-).0189-A or (-).0194-B. •    Flywheel/drive plate locking tool – Citroen […] More